SCIENCE WITH DATALOGGING
Chemistry is the study of matter and energy and the interactions between them. This is also the definition for physics, by the way. Chemistry and physics are specializations of physical science. Chemistry tends to focus on the properties of substances and the interactions between different types of matter, particularly reactions that involve electrons.
BASIC ELECTRONICS WITH COMPUTER
Exp-1 To study ohm’s law.
Exp-2 To study V-I characteristics of Incandescent Lamp.
Exp-3 Study of Diode as Rectifier & its applications.
(I-V characteristics of Rectifier Diode, Half wave rectifier, Full wave rectifier, Positive clipper and Negative clipper)
Exp-4 To study V-I characteristics of a Light Emitting Diode.
Exp-5 Study of Zener Diode & applications.
(a) I-V characteristics of Zener Diode in forward and reverse biased
(b) Zener Diode as Voltage regulator.
Exp-6 To investigate Series and parallel combinations of resistors.
Exp-7 To determine resistance per cm of a given wire by plotting a graph of potential difference versus current.
Exp-8 To draw the I-V characteristic curve of a p-n junction in forward bias and reverse bias.
Exp-9 To study the characteristics of a common - emitter NPN transistor and to find out the values of current and voltage gains.
Exp-10 To find the relationship between potential difference across a capacitor and time during its charging and discharging.
BASIC ELECTRONICS WITH COMPUTER
- Student uses Plug- in Modules himself for preparation of circuit.
- This 'Do It Yourself Approach’ provides better learning.
- Very convenient & easy to use 4mm sockets provided to Plug the modules in circuit board for preparation of circuits.
- Economical & Flexible method of performing all experiment on one circuit board in case you buy a complete set.
CBSE BIOLOGY EXPERIMENT KIT
Exp-1 Osmosis by measuring the rate of pressure change as water moves in or out of potato wells filled with various concentrations of sugar solutions.
Exp-2 Comparative study of the rates of transpiration in the upper and lower surface of leaves.
Exp-3 To study the rate of respiration in flower buds/leaf tissue and germinating seeds.
Exp-4 Collect and study soil from at least two different sites and study these for texture, moisture content, pH and water holding capacity of soil. Correlate with the kinds of plants found in them.
Exp-5 Collect water from two different water bodies around you and study the samples for pH, clarity and presence of any living organisms.
Exp-6 To study the effect of the different temperatures and three different pH on the activity of salivary amylase on starch.
Exp-7 To show experimentally that light is necessary for photosynthesis
CBSE CHEMISTRY EXPERIMENT KIT
Exp-1 Determination of pH of some solutions obtained from fruit juices, solution of known and varied concentrations of acids, bases and salts using pH paper or pH sensor.
Exp-2 Comparing the pH of solutions of strong and weak acids of same concentration.
Exp-3 Study the pH change in the titration of a strong base.
Exp-4 Study the pH change by common-ion in case of weak acids and weak bases.
Exp-5 Determination of strength of a given solution of hydrochloric acid by titrating it against standard sodium carbonate solution.
Exp-6 Determination of strength of a given solution of sodium hydroxide by titrating it against standard solution of oxalic acid.
Exp-7 Effect of concentration and temperature on the rate of reaction between sodium thiosulphate and hydrochloric acid.
Exp-8 Variation of cell potential in Zn/Zn2+|| Cu2+/Cu with change in concentration of electrolytes (CuSO4 or ZnSO4) at room temperature.
Exp-9 To determine the melting point of ice and the boiling point of water.
Exp-10 To find the pH of the following samples by using pH paper/ pH sensor.- Dilute Hydrochloric acid, Dilute NaOH solution, Dilute ethanoic acid solution, Lemon juice, Water, Dilute sodium bicarbonate solution.
Exp-11 To find out the molarity of mohr’s salt.
CBSE PHYSICS EXPERIMENT KIT
Exp-1 Using a simple pendulum, plot L-T and L-T2 graphs. Hence find the effective length of second's pendulum using appropriate graph.
Exp-2 To study the relationship between force of limiting friction and normal reaction and to find the co- efficient of friction between a block and a horizontal surface.
Exp-3 To find the downward force, along an inclined plane, acting on a roller due to gravitational pull of the earth and study its relationship with the angle of inclination φ by plotting graph between force and sin(φ).
Exp-4 To study the variation in volume with pressure for a sample of air at constant temperature by plotting graphs between P and V, and between P and I/V.
Exp-5 To find the speed of sound in air at room temperature using a resonance tube by two resonance Positions.
Exp-6 To determine resistance per cm of a given wire by plotting a graph of potential difference versus current.
Exp-7 To draw the I-V characteristic curve of a p-n junction in forward bias and reverse bias.
Exp-8 To draw the characteristic curve of a zener diode and to determine its reverse breaks down voltage.
Exp-9 Characteristics of PN diode.
MECHANICS & LIGHT EXPERIMENTS KIT
- All experiments carried with Data Logger & Sensors.
- Computer connectivity & analysis of data accurately.
- All accessories have been krafted precisely to enhance accuracy of experiment conduction..
- Multiple use of components
SOUND WAVES KIT
Exp-1 To demonstrate the sound waves and beats.
Exp-2 To find out the frequency of any unknown tunning fork.
Exp-3 To find out the speed of sound.
Exp-4 To demonstrate the Mathematics of Music.