CBSE PHYSICS EXPERIMENT KIT
DescriptionExp-1 Using a simple pendulum, plot L-T and L-T2 graphs. Hence find the effective length of second's pendulum using appropriate graph.
Exp-2 To study the relationship between force of limiting friction and normal reaction and to find the co- efficient of friction between a block and a horizontal surface.
Exp-3 To find the downward force, along an inclined plane, acting on a roller due to gravitational pull of the earth and study its relationship with the angle of inclination φ by plotting graph between force and sin(φ).
Exp-4 To study the variation in volume with pressure for a sample of air at constant temperature by plotting graphs between P and V, and between P and I/V.
Exp-5 To find the speed of sound in air at room temperature using a resonance tube by two resonance Positions.
Exp-6 To determine resistance per cm of a given wire by plotting a graph of potential difference versus current.
Exp-7 To draw the I-V characteristic curve of a p-n junction in forward bias and reverse bias.
Exp-8 To draw the characteristic curve of a zener diode and to determine its reverse breaks down voltage.
Exp-9 Characteristics of PN diode.
Exp-10 To study the Simple Harmonic Motion.
Exp-11 Charging and Discharging of the capacitor.
Exp-12 To study the characteristics of a common - emitter NPN or PNP transistor and to find out the values of current and voltage gains.
Exp-13 To verify laws of reflection of sound.
Exp-14 To study the dependence of potential difference (V) across a resistor on the current (I) passing through it and determine its resistance. Also plot a graph between V and I.
Exp-15 To determine the equivalent resistance of two resistors when connected in series.
Exp-16 To determine the equivalent resistance of two resistors when connected in parallel.
Scope of Supply:
Item Name | Qty. |
LabQuest 2 | 1 |
Low-g Accelerometer | 1 |
Force Sensor | 1 |
Photo-gates | 2 |
Current Probe sensor | 2 |
Voltage Probe sensor | 1 |
Magnetic Field Sensor | 1 |
Temperature Probe | 1 |
Light Sensor | 1 |
Gas Pressure sensor | 1 |
Friction block & Roller | 1 |
Weight (50 x 10gm) | 1 |
Metal Track | 1 |
Inclined plane | 1 |
Base & Rod | 2 |
Boss head | 2 |
Calorimeter | 1 |
Dynamic trolley | 2 |
Pendulum ball | 1 |
Item Name | Qty. |
Motion detector | 1 |
Pendulum support | 1 |
Spring | 1 |
Weight (50 x 10gm) | 1 |
Acrylic tube | 1 |
Tube holder | 1 |
Plug in board | 1 |
Resistance board | 1 |
Connecting lead | 10 |
Transistor | 2 |
Zener diode | 1 |
Diode | 1 |
Led | 1 |
Switch | 1 |
Capacitor module | 1 |
Resistance modules | 3 |
Power supply 0-16V | 2 |
Logger Pro3 | 1 |
ADDITIONAL EXPERIMENTS:
Exp-1 To demonstrate inter-conversion of potential and kinetic energy.
Exp-2 To demonstrate conservation of linear momentum.
Exp-3 To demonstrate the phenomenon of beats, due to superposition, of waves produced by two sources of sound of slightly different frequencies.
Exp-4 To demonstrate the production of induced emf in a coil due to the movement of (i) a magnet towards and away from it.(ii) a similar coil carrying current towards and away from it.
Exp-5 To demonstrate the effect of intensity of light.
Exp-6 Determining g on an Incline.
Exp-7 The Magnetic Field in a Coil.
Exp-8 Newton's Second Law and Third Law.
Exp-9 Energy in Simple Harmonic Motion.
Exp-10 Newton's Law of Cooling.