Battery Boxes & Switches

Plastic moulded holder with brilliant finishing to hold cell of 1.5 volt, big size. Individual units can be joined in a tandem to make a battery of required voltage. Sockets of 4mm are provided on the cell holder.

Dimensions: 74x38mm (L x W), Single holder

 Single cell
 Double cell
 Four cell

Provided with one no. 4mm red terminal and two nos. of 4mm black terminals. Provision for holding (2 x 1.5V) dry cells. Maximum capacity 3V.

Provided with one no. 4mm red terminal and four nos. of 4mm black terminals. Maximum capacity 6V. Provision for holding (4 x 1.5 V)dry cells.

It consists of double pole knife switch mounted on a plastic base with rubber feet and 4mm terminals facilitating connection by 4mm plug leads or bare ended leads. Base: Plastic, 165 x 100 mm

 

Cat. No.	Length	Colour
SN200	500mm	Black
SN201	1000mm	Black
SN202	2000mm	Black
SN203	500mm	Red
SN204	1000mm	Red
SN205	2000mm	Red
SN206	500mm	Yellow
SN207	1000mm	Yellow
SN208	2000mm	Yellow

Morse Key used for making & breaking of circuits for short durations. Recommended for voltage below 24 volts. Mounted on PVC sheet with adjustable spring.

 

Consists of two brass blocks with socket terminals mounted on an insulated base. Contact is made by a tapered plug with an insulating top. Base size: 100x62mm

Toggle switch ON/OFF is mounted on acrylic base with 4mm sockets.

It consists of on/off switch mounted on a plastic box, with switch symbol printed. Provided with 4 mm safety sockets. Base: Plastic, 100x75x40 mm (l x w x h).